::: SmartXX Version 2 Pinheader-Install :::

Remove the six screws on the bottomside of your box:

Unplug the two cables of the harddisk (yellow arrows)
Remove the three screws of your DVD-Drive (green arrows)

Remove the harddisk carefully
Unplug the two cables of your DVD-Drive (yellow arrows)

Unplug the five cables (yellow arrows)
Remove the screws of the mainboard (green arrows)

Plug the pinheader into the LPC-Port and solder it on the backside of the board.

Solder the yellow connections with isolated wires and
the LFrame wire to the D0-Point of your SmartXX.
That´s it, have fun with your SmartXX !